Description
Dosing Pump Timer, Automatic Passivation Timer
Dosing Pump Timer or Timer for Dosing of chemical,
It works in 4 steps
1. Passivation Dipping time
2. Buzzer activating and auto-off time
3. Chemical Dosing in ML
4. Setting of no. of cycles after that dosing to be repeated again.
it operates automatically by hand sensing of the operator or by material bucket sensing
Set Value of Passivation Timeย Dosing Pump Timer
Push SET Button Once
use the UP and DN buttons to adjust the required value, Press the ENT button to save Passivation Time.
Setting Buzzer Time
Push SET Button Twice, use UP and DN buttons to adjust the required value, Press the ENT button to save Buzzer activation Time.
Setting Quantity of Chemical to be the dose at once
Push SET Button Three times, use UP and DN buttons to adjust the required value, Press ENT button to save Quantity to be dose in ML.
Setting Repeat cycle difference
Push SET Button Fourth Time, use UP and DN buttons to adjust the required value, Press ENT button to save no of difference between 2 dosings.
Setting Set Min / Sec : Dosing Pump Timer
Push SET Button with ENT at Once, switch ON the Power, use UP and DN buttons to Select the required value, Press the ENT button to save
Set Decimal Point
Press SET and DN Button at Once, Switch ON the Power, Set Decimal Point if required, Press ENT button to save
Reviews
There are no reviews yet.