Description
Flow Sensor 1/4 inch
Magnetic flow sensors operate on the principle that the movement of a conductor through a magnetic field provides a voltage. , They consist of a tube that generates the magnetic field in the pipeline, and an electronic converter that measures induced voltage.Flow Sensor 1/4 inch
Main Containt :
This 1/4 inch water sensor is basically a small turbine whose output signal is a series of digital pulses. The frequency of the pulses is proportional to the flow rate of the liquid passing through the sensor. That digital signal, whose frequency is in the range between 0Hz and 100Hz, can be read directly through one of the digital
This flow sensor is mainly used for accurate flow measurement. It may be installed in the hot water inlet end for detecting water flow.
When water through the flow rotor assembly, the magnetic rotor will rotate and the Speed of a rotor will change as the flow change.
Hall current sensor Read the pulses and provide output corresponding pulse signal and feedback sent to the controller.
then the controller will measure the flow and display the value in terms of speed and total volume passed through the sensor.
these sensors may be used for water heaters, credit card machines, water vending machines,measurement devices.
Others Models in this category:
main features are :
Light-weight, small size, easy to install.
Inlaid with stainless steel impeller shaft, durable wearable.
The seal ring with the upper and lower force structure never leaks.
Non-violent shock, and chemical erosion.
Non-throwing or hitting.
Mounted vertically, should not exceed 5 degrees inclination.
The temperature of the medium should not exceed 120 ℃.
Technical Specifications :
Minimum rated working voltage: DC 5~24V;
Max. working current: 15mA (DC 5V);
Working voltage range: DC 5~18V;
Load capability: <= 10mA (DC 5V);
Working temperature: <= 80’C;
Humidity range: 35%~90%RH (no frost);
Water pressure: <1.75Mpa;
Storage temperature: -25~80’C; Storage humidity: 25~95%RH;
range: 1~5L/min’; Frequency: 4380 pulse for 1L through the sensor
Dimensions: 2.28 in x 1.38 in x 1.06 in (5.8 cm x 3.5 cm x 2.7 cm)
Thread Size : G1/4″
we should connect the sensor with digital controller as given below:
Red: Positive(+)
Yellow: Signal output.
Black: Negative(-)
Reviews
There are no reviews yet.