Description
Salt Spray Test Chamber SST-216B
- Salt Spray Test Chamber SST-216B Liter for Laboratory : Basic Model
- Chamber Size : L*W*H = 600 mm*600 mm*600 mm
- Overall Size ( Space Required For Machine) approx. : L*W*H = 775 mm*700 mm*900 mm
Other Models in Catagory :Salt Spray Chamber
- Salt Spray Test Chamber 162A Standered for Laboratory
- Salt Spray Test Chamber 162B ASTMb117 for Laboratory
- 216A Corrossion Test Chamber Basic Model
- Salt Spray Test Chamber 216B ASTM b117
- Salt Spray Test Chamber 240A Standered b117
- Touch Screen and Graphical Display Corrossion Test Chamber
- Coustom Designed as per Any Other Size or Specification
Feature : 216 Liter (Over all Size 775*700*900 MM)
- Main Chamber PP, 8 MM Sheets
- Acrylic Transparent Top 5 MM
- Material Hangers 4 -6 Hanging Rods (Depending on Max. Job Size)
- Main Water Tank Separated From Spray Chamber. Capacity 20 Liters.
- Saline Solution Label Low in Reservoir Tank Indication at front panel.
- Auto fill and label maintaining System for Reservoir Saline tank. Sensors available for maintaining water level between high and low levels.
- Chamber Waste water Auto Drainage Control Systems. (No manual drain)
- Fully Automatic Temperature Controller double display for Heating of Water.
- Temperature over Heat Warning Indicator on front panel.
- Well Insulated Electric Shock Free, anti-Corrosion, Unbreakable Heaters (Life 10 Years/ No Glass Heater)
- Fogging System Side ways
- Standardized Fogg collection System
- Hour Meter 999 Hours 59.9 Minutes
- Process Complete Buzzer Alarm with Indicator
- Supply 220 VAc
- Warranty 1 Year
Salt Spray Test Chamber SST-216B Basic Model
1. SCOPE:- Apparatus suitable to salt spray (fog) testing of ferrous and nonferrous metals and also used to test inorganic and organic especially where such tests are the basis for material or products specifications.
2. APPARATUS:- The apparatus required for salt spray (fog) testing consists of a “Fog Chamber” Salt solution chamber, Air Supply System, one or more atomizing nozzle, specimen supports, heaters for heating salt solution, and necessary means of control.
Temperature Controller:- To Control the temperature of Humidity / Chamber for heating of fogged water, with Auto Cut system to maintain the temperature within the specified range 32 to 37 degrees Celsius.
Temperature Indicator:- To Observe temperature of salt spray Chamber. The exposure zone of the salt spray chamber shall be maintained at 35 +/_ 2 degrees C
Digital Timer 6 digits:- To observe/inspect the condition of test samples periodically and recording long with time
At least 3 digits in Hour and 2 digits in minutes
pH Meter:- To check ph Value of solution used for spray. The pH value of salt solution shall be such that when atomized at 35 degrees C the collected solution will be in the pH range from 6.5 to 7.2
AIR SUPPLY:- The air supply must be free from Oil, Dust, , the air supply/pressure must be maintained in such a way so that salt fog occurs, Pressure must be 1 Kg +/- 0.2 Kg
ATOMIZATION AND QUANTITY OF FOG:- The fog shall be such that for every 80 cm2 (4 Inch Funnel ) of horizontal collecting area, there will be collected from 1.0 to 2.0 mL of solution per hour based on an average run of at least 16 h
Supply 220 VAc; Warranty 1 year
pH Meter
Reviews
There are no reviews yet.