Description

Safety Light Curtain SLC-1030

Safety Light Curtain Sensor, Safety Light Curtain SLC-1030
OVERALL HEIGHT(MM) : 365 MM
PROTECTED HEIGHT(MM) : 300 MM
NO OF BEAM: 010 BEAM
PITCH: 30 MM
output PNP or NPN/ NC
Output indications Through corresponding LEDs
Sensor Power Supply 12-24 volts DC
Response time On to off:10-15 msec.
Operating Temperature Up to 55 Degrees centigrade
Protections Output short circuit protected
Cross Section 50X36 mm

Controller for safety Light Curtain  :

Power Supply Controller 220 VAC;
Relay Output ; 1 or 2 relay

Cable Set For Safety Light Curtain

Two Cables are Required for Installation

1. Emitter cable length 5 Meter
2.  Reciever Cable Length 3 Meter
3. with suitable Connectors at one End

Other Models in This Category:

1. Safety Light Curtain SLC-0630
2. Safety Light Curtain SLC-0830
3. Safety Light Curtain SLC-1030
4. Safety Light Curtain SLC-1230
5. Safety Light Curtain SLC-1630
6. Safety Light Curtain SLC-1830
7. Safety Light Curtain SLC-2430
8. Safety Light Curtain SLC-3030
9. As per Demand special orders

Other Features:-

Sensor Power Supply  : 12-24 volts DC
output  ; PNP or NPN/ NC
Output indications ; Through corresponding LEDs
Response time On to off : 10-15 msec.
No of beams : 8,10,12,16, 18, 24, 30, or as required
Beam bypass Provided in Controller
Adjustable Range Up to 3 meters
Higher Sensing range up to 5,10,15 meter. available on demand
Standard Cable length 5 meters for the emitter, 3 meters for the receiver
Operating Temperature Up to 55 Degrees centigrade
While the Protections Output short circuit protected
Hence it Suitable for Machines with quick emergency stop

Hence all Safety Light curtains must comply with IEC-61496 parts 1 & 2 ; as ANSI/UL 61496 parts 1 & 2. While Light curtains’ “TYPE” their Safety. Thus Performance Level, must be appropriately selected. Hence Light curtains’ optional functions, as listed in Annex “A” of IEC-61496 part 1, must comply with Annex “A” requirements.

working Principle:

The safety light curtain consists of two parts: Hence Transmitter + Receiver. While The transmitter contains multiple Infrared LEDs that send pulses of infrared light to the receiver. When an interrupt occurred between the transmitter and receiver then we receive an output that used to stop working or raise alarm.

Join Us as Business Partner / Dealer / Stockist in Your City Send your  Proposal / offer to us. Your efforts will be highly appreciated.

pH Meter

Like MCS Facebook Page for recent offers & Updates!